loading

Hydrerende

Hydraulics™ LT 2.5L Reservoir

Tilgjengelighet: På lager

kr 400,00
Hydraulics™ LT 2.5L Reservoir Front
Hydraulics™ LT 2.5L Reservoir Back
Hydraulics™ LT 2.5L Reservoir Front Side

Levering & Retur

Bestill før 16.00 CET for levering innen to virkedager
30 dagers returrett

Hydraulics™ LT 2.5L Reservoir

Hydraulics™ LT-reservoaret er designet for å være lett i vekt og enkelt i bruk. Den unike kombinasjonen av helleskjoldet og Slide-Seal™-toppåpningen gjør at du enkelt kan fylle og tømme reservoaret, mens du muliggjør full tilgang til å rengjøre etter bruk. De tvillingsveisede chevronklaffene gir stabilitet, opprettholder en flat profil og holder væsken under kontroll når du er ute og utforsker røft terreng. Biteventilen er magnetisk, noe som gir enkel bortstuing og tilgang på vann mens du er på farten. Når den ikke er i bruk, har biteventilen også et enkelt på/av vridelåssystem. Med en konstruksjon av sterkt, likevel lett TPU-materiale, som er designet for å tåle enten iskaldt eller kokende vann, gir QuickConnect™-systemet deg muligheten til å fjerne reservoaret for enklere pålasting, utskifting eller rengjøring.

Nøkkelegenskaper

  • Slide-seal™ toppåpning for enkel påfylling og rengjøring
  • Sveiset v-form på væskeregulatoren hindrer plasking og opprettholder formen
  • Inkludert Quickconnect ™ gir enkel frakobling av slangen
  • Biteventil gir rask og jevn levering av vann
  • Laget av et sterkt og holdbart TPU-materiale
  • BPA fri
SPESIFIKASJONER
Vekt: 0.170 kg
Maksdimensjoner (cm): 39 (l) x 19 (w) x 6.5 (d)

Omtaler fra kunder

3
Basert på 5 vurderinger
Skrive en ny kundeomtale Hide Review Form

Skriv din egen omtale

Du vurderer: Hydraulics™ LT 2.5L Reservoir

Hvordan vurderer du dette produktet? *

  1 stjerne 2 stjerner 3 stjerner 4 stjerner 5 stjerner
Rating
Jon
The good stuff:
It is lightweight and, on the whole, well constructed.
I like the baffles that keep it from ballooning out so it stays flatter.
I like that the top can be completely opened.
The flow rate for the bite valve is good, once you get used to using it.
The BAD stuff:
The bit valve takes some getting used to, it's at a funny angle which doesn't make sense, the twist lock is impossible to do with one hand and hard to do even with two.
But, the biggest problem, which should not have made it through to production is the quick connect attachment for the hose. The concept is good as it saves you having to rethread the hose each time you fill up, but the quick release button is so sensitive you hardly have to breath on it and it depresses separating the hose. With all your kit stuffed in your sack and bouncing around when walking, or worse when cycling, this is not just likely, but inevitable. Fortunately, it has a valve on the reservoir side so it won't dump the entire reservoir on your kit but there isn't a valve on the hose so the contents of the hose is free to dribble out over your belongings unbeknown to you - until you go for a drink which doesn't come, and then have to go through the faff of opening your pack to reconnect it.
Osprey have clearly thought about this issue, but haven't done satisfactory testing; they have designed in a plastic guard next to the giant button but this is frankly useless which would have been obvious to anyone the second they looked at it, if they actually cared. This NEEDS a redesign in order to be a viable product, in it's current form it makes the whole system useless and a waste of £30. It's a shame that one feature that is meant to be better, let's the product down so comprehensively, because it's definitely worth more than 1 star otherwise.
Pulling a bottle from the side pocket remains a better option than this.
Osprey Customer Service, 

Hi Jon,

Thank you for taking the time to write a review on our Hydraulics 2.5L reservoir.

We have passed this feedback on to our design team for consideration.

We haven’t noticed the quick-connect releasing too easily before, as the tension of the release button is designed to be relatively high. It sounds like you may have received a faulty component which is releasing with minimal pressure. We will, of course, be happy to replace this for you. Please contact our Guarantee Team to ask for a new component. 

Kind regards,

Osprey Customer Service

Piotr
I purchased a Hydraulics LT 2.5L Reservoir in April to replace the original 3L Osprey reservoir that came with my 2 year old Osprey Viper 13 Hydration Pack.

While I loved the original reservoir, the new reservoir has been a disaster.

Shortly after purchase, the bite valve developed a crack, causing it to leak constantly. I replaced this with an old style bite valve that I managed to source from my local outdoor store, which is far superior in design and quality.

Subsequently, the pack was rendered completely useless after developing a heavy leak in the corner of the Slide-seal top opening, causing it to drench my bag and my back on a recent bike ride.

What's more, the QuickConnect hose has been nothing but trouble, disconnecting spontaneously whist in the bag, causing me to almost lose the top end of the hose on several occasions.

The whole construction of the reservoir also feels very unsturdy compared to the original due to a lack of a spine.

Whilst I've been a fan of Osprey for a long time, I've been left throughly disappointed by the redesign of the Osprey hydration reservoir range and it seems to me that the main objective of the redesign was cost-saving, not improvement. I hope that the issues gets addressed promptly.
Osprey Customer Service, 

Hello Piotr,

Sorry that you have had these issues with your hydraulics reservoir, we do have our no leak hydraulics guarantee which covers all manufacturing defects in materials and workmanship for the lifetime of the product. 

As for your design feedback we do have 2 different hydraulics reservoirs, the hydraulics LT which doesn't have a hard plastic spine to keep the weight down but does have welded chevrons to provide support and prevent sloshing and the hydraulics reservoir which has the hard spine to support the reservoir in the pack, similar to the original one that would have come with your pack. 

I would suggest that you get in touch with our guarentee team to see what we are able to do for you, you can do this by filling out this Form

I hope that your issue get resolved. 

 

 

Clive
I've used a Platypus "Hoser" system in the past so treated myself to the Osprey equivalent when I bought the new Exos 58 rucsack for the 250 km Stevenson Way in France. At first I didn't like it much. It was often awkward to fill and I was very unhappy when, after about 3 days, the flimsy plastic hook that it hangs from in the rucsack snapped off. Fortunately it was easily replaced with a short loop of cord which proved to be a much better method than the original. After that it was fine, much better than stopping to get a bottle out of a rucsack pocket - and it keeps your water cooler being inside your rucsack.
garrett
great value for money. Very easy to clean. Does not drip or leak after using. Fits nicely either in backpack or outside in pouch's.
would highly recommend.
Michael
I bought this new reservoir after my Source bladder began to leak. Compared to the Source, I like Hydrapak's Blaster bite valve which has a higher flow-rate and the better placement of the Quick Connect valve. The Slide-Seal top works well too. Despite the fact that Hydrapak manufacture a great dust cover specifically for the Blaster valves that they sell, Osprey marketing have decided to pennypinch and not include it. Even worse, as at the end of April 2016, Osprey do not even sell the Blaster bite valve cover as a separate item - you have to buy a complete replacement Blaster valve & cover from another company. Whilst the magnet should hold the valve out of the mud, they are not infallible and offer no protection to contamination from wind borne dust..
Osprey Customer Service, 

Hi Michael,

Thanks for your feedback. The Blaster bite valve cover will be released in the Summer as an accessory. We hope to have it available on our website soon.

  • Biteventil gir rask og jevn levering av vann
  • BPA fri
  • Bærehåndtak muliggjør enkel håndtering av reservoaret og påfylling
  • Lett å bytte ut Hydraulics™ Reservoir drikkesystem
  • Inkludert Quickconnect ™ gir enkel frakobling av slangen
  • Litre markings printed on reservoir body
  • Laget av et sterkt og holdbart TPU-materiale
  • Pour shield extends the collar for easy filling
  • Avtagbar slange og munnstykke som kan skiftes
  • Slide-seal™ toppåpning for enkel påfylling og rengjøring
  • Sveiset v-form på væskeregulatoren hindrer plasking og opprettholder formen

Vurderinger (5)

Omtaler fra kunder

3
Basert på 5 vurderinger
Skrive en ny kundeomtale Hide Review Form

Skriv din egen omtale

Du vurderer: Hydraulics™ LT 2.5L Reservoir

Hvordan vurderer du dette produktet? *

  1 stjerne 2 stjerner 3 stjerner 4 stjerner 5 stjerner
Rating
Jon
The good stuff:
It is lightweight and, on the whole, well constructed.
I like the baffles that keep it from ballooning out so it stays flatter.
I like that the top can be completely opened.
The flow rate for the bite valve is good, once you get used to using it.
The BAD stuff:
The bit valve takes some getting used to, it's at a funny angle which doesn't make sense, the twist lock is impossible to do with one hand and hard to do even with two.
But, the biggest problem, which should not have made it through to production is the quick connect attachment for the hose. The concept is good as it saves you having to rethread the hose each time you fill up, but the quick release button is so sensitive you hardly have to breath on it and it depresses separating the hose. With all your kit stuffed in your sack and bouncing around when walking, or worse when cycling, this is not just likely, but inevitable. Fortunately, it has a valve on the reservoir side so it won't dump the entire reservoir on your kit but there isn't a valve on the hose so the contents of the hose is free to dribble out over your belongings unbeknown to you - until you go for a drink which doesn't come, and then have to go through the faff of opening your pack to reconnect it.
Osprey have clearly thought about this issue, but haven't done satisfactory testing; they have designed in a plastic guard next to the giant button but this is frankly useless which would have been obvious to anyone the second they looked at it, if they actually cared. This NEEDS a redesign in order to be a viable product, in it's current form it makes the whole system useless and a waste of £30. It's a shame that one feature that is meant to be better, let's the product down so comprehensively, because it's definitely worth more than 1 star otherwise.
Pulling a bottle from the side pocket remains a better option than this.
Osprey Customer Service, 

Hi Jon,

Thank you for taking the time to write a review on our Hydraulics 2.5L reservoir.

We have passed this feedback on to our design team for consideration.

We haven’t noticed the quick-connect releasing too easily before, as the tension of the release button is designed to be relatively high. It sounds like you may have received a faulty component which is releasing with minimal pressure. We will, of course, be happy to replace this for you. Please contact our Guarantee Team to ask for a new component. 

Kind regards,

Osprey Customer Service

Piotr
I purchased a Hydraulics LT 2.5L Reservoir in April to replace the original 3L Osprey reservoir that came with my 2 year old Osprey Viper 13 Hydration Pack.

While I loved the original reservoir, the new reservoir has been a disaster.

Shortly after purchase, the bite valve developed a crack, causing it to leak constantly. I replaced this with an old style bite valve that I managed to source from my local outdoor store, which is far superior in design and quality.

Subsequently, the pack was rendered completely useless after developing a heavy leak in the corner of the Slide-seal top opening, causing it to drench my bag and my back on a recent bike ride.

What's more, the QuickConnect hose has been nothing but trouble, disconnecting spontaneously whist in the bag, causing me to almost lose the top end of the hose on several occasions.

The whole construction of the reservoir also feels very unsturdy compared to the original due to a lack of a spine.

Whilst I've been a fan of Osprey for a long time, I've been left throughly disappointed by the redesign of the Osprey hydration reservoir range and it seems to me that the main objective of the redesign was cost-saving, not improvement. I hope that the issues gets addressed promptly.
Osprey Customer Service, 

Hello Piotr,

Sorry that you have had these issues with your hydraulics reservoir, we do have our no leak hydraulics guarantee which covers all manufacturing defects in materials and workmanship for the lifetime of the product. 

As for your design feedback we do have 2 different hydraulics reservoirs, the hydraulics LT which doesn't have a hard plastic spine to keep the weight down but does have welded chevrons to provide support and prevent sloshing and the hydraulics reservoir which has the hard spine to support the reservoir in the pack, similar to the original one that would have come with your pack. 

I would suggest that you get in touch with our guarentee team to see what we are able to do for you, you can do this by filling out this Form

I hope that your issue get resolved. 

 

 

Clive
I've used a Platypus "Hoser" system in the past so treated myself to the Osprey equivalent when I bought the new Exos 58 rucsack for the 250 km Stevenson Way in France. At first I didn't like it much. It was often awkward to fill and I was very unhappy when, after about 3 days, the flimsy plastic hook that it hangs from in the rucsack snapped off. Fortunately it was easily replaced with a short loop of cord which proved to be a much better method than the original. After that it was fine, much better than stopping to get a bottle out of a rucsack pocket - and it keeps your water cooler being inside your rucsack.
garrett
great value for money. Very easy to clean. Does not drip or leak after using. Fits nicely either in backpack or outside in pouch's.
would highly recommend.
Michael
I bought this new reservoir after my Source bladder began to leak. Compared to the Source, I like Hydrapak's Blaster bite valve which has a higher flow-rate and the better placement of the Quick Connect valve. The Slide-Seal top works well too. Despite the fact that Hydrapak manufacture a great dust cover specifically for the Blaster valves that they sell, Osprey marketing have decided to pennypinch and not include it. Even worse, as at the end of April 2016, Osprey do not even sell the Blaster bite valve cover as a separate item - you have to buy a complete replacement Blaster valve & cover from another company. Whilst the magnet should hold the valve out of the mud, they are not infallible and offer no protection to contamination from wind borne dust..
Osprey Customer Service, 

Hi Michael,

Thanks for your feedback. The Blaster bite valve cover will be released in the Summer as an accessory. We hope to have it available on our website soon.

funksjoner

  • Biteventil gir rask og jevn levering av vann
  • BPA fri
  • Bærehåndtak muliggjør enkel håndtering av reservoaret og påfylling
  • Lett å bytte ut Hydraulics™ Reservoir drikkesystem
  • Inkludert Quickconnect ™ gir enkel frakobling av slangen
  • Litre markings printed on reservoir body
  • Laget av et sterkt og holdbart TPU-materiale
  • Pour shield extends the collar for easy filling
  • Avtagbar slange og munnstykke som kan skiftes
  • Slide-seal™ toppåpning for enkel påfylling og rengjøring
  • Sveiset v-form på væskeregulatoren hindrer plasking og opprettholder formen